Arabic
تقدم شركه ماس للانظمه المتقدمه والتوريدات العامه نظام بوابات دخول وخروج الافراد ماركه PERCO
ST-02 Speed gate with standard sliding panels
Application
ST-02 Speed gate with sliding panels is designed for indoor operation. It is an ideal solution for sites with high aesthetic and comfort requirements.
ST-02 is available in two versions: a standard passageway width of 600 mm (ST-02.600 version) or an extended one of 900 mm (ST-02.900). The extended version provides convenient access for people in wheelchairs and ensures free passage in case of an emergency. The panels are sliding away when a passage takes place.
If an increased number of passage lanes is needed, STD-02 double-sided sections can be installed. Each double-sided section allows arranging one extra passage lane. STD-02 is available in two main versions: STD-02.600 and STD-02.900 for organizing passage lanes with a width of 600 mm and 900 mm, respectively.
ST-02.600/900 is available on a separate order to arrange passage lanes of different widths (600 and 900 mm). For the same purpose, the STD-02.900 double-sided section has the possibility of reducing one panel to 600 mm.
The tracking system is equipped with two levels of infrared sensors, which guarantees the safety of passage at high throughput and provides avoiding the simultaneous passage of two or more people
Main features
operation of the speed gate from RC-panel, WRC, ACS
built into the housing electronic boards
safe voltage – 24 V
power consumption – max. 204 W per passage
upper and lower levels of infrared sensors of the passageway, 30 sensors on each level
possibility to perform authorized single passage of several users one after the other in a row in the same direction without closing the panels increases the throughput capacity
closing the passage zone with panels; space above the sections can be overlapped with additional glass panels of up to a height of 148 cm
if necessary, the number of passage lanes through the turnstile can be increased by installing STD-02 double-sided sections
possibility to install proximity card readers inside sections under the glass top cover (overall reader dimensions – max. 230х72х32 mm, reading range – min. 40 mm)
there is a place for installing the ACS controller inside the section (overall dimensions – max. 160x140x40 mm)
section glass top covers feature grant/denial passage indication
reader interrogation zones are indicated with backlit pictograms
backlit lateral indication of passage direction
Fire Alarm input for connecting the emergency passage opening device; when the command is sent from it, the panels are automatically opened and it is possible to walk through in both directions
outputs for connecting remote indication blocks of passage grant / denial, as well as a sounder (sirens)
two control modes: pulse and potential; it can operate both as a standalone unit controlled by the operator using RC-panel and as a part of ACS
| ماركة / براند | PERCO |
| تكلفة الشحن |
|
| موقع المتجر | 28 متولي الشعراوي امتداد مهدي عرفة بجوار مستشفى الماسة الحي العاشر مدينة نصر, Cairo, Egypt |
لم يتم العثور على أي تعليقات!
لا توجد تعليقات وجدت لهذا المنتج. كن أول من يعلق!